gamewell-fci 12 clintonville road, northford, ct 06472-1610 usa ? tel: (203) 484-7161 ? fax: (203) 484-7118 specifications are for information only , are not intended for installation purposes , and are subject to change without notice. no responsibility is assumed by gamewell-fci for their use. ?2013 by honeywell international inc. all rights reserved. www.gamewell-fci.com 9020-0554 rev. o page 1 of 1 asm-16 asm-16 addressable switch module rear view front view approved fm 3017416 s1869 signaling approved city of chicago class 1 class 2 high rise 7165-1703:0125 7170-1703:0126 fdny: coa # 231-06-e mea approved city of denver approved description ? the gamewell-fci, asm-16 addressable switch module serves as the point of inte rface between an operator and the system?s audio evacuation, fire fighter intercom, and building control circuits. it is a component of the following systems: ? e3 series ? expandable emergency evacuation system ?e3 series combined fire and mass notification system ? e3 series broadband voice evacuation system ?netsolo ? system ? the asm-16 is a configurable switch input sub-assembly with 16 switches and 48 status leds. it may be remotely located via the rs-485 serial interface. each asm-16 addressable switch module has 16 push-button switches that can be programmed to serve any function the applica- tion demands. ? an asm-16 switch can be programmed to operate as any of the following functions: ? speaker circuit switch ? fire fighter phone switch ? auxiliary control switch (using a bank of 2 switches (1 switch each for on-off-auto functions). ? switches with custom-defined functions: - system reset - system silence - system acknowledge - all-call, phone patch - lamp test, alarm tone on - manual select, etc. ? each asm-16 switch also has 3 fully programmable leds that appear in red, yellow, and green. these leds can be programmed to work in concert with their associated push- button switch or they can be programmed to work inde- pendently as status indicators (e.g. on, off, normal, etc.). ? an ini-vgc assembly or ili-mb-e3/ili95-mb-e3 can accommodate up to 16 asm-16 modules for a total of 256 switches and 768 leds. ? specifications ? operating voltage: 24 vdc (nominal) (from the pm-9/pm-9g power supply) operating current: 0.011 amp. (with no leds lit) operating temperature: 32 to 120 f (0 to 49 c) relative humidity: 0 to 93% (non-condensing) at 90 f (32 c) e3 series ? and netsolo ? are registered trademarks of honeywell international inc. ul ? is a registered trademark of underwriters laboratories inc. features ? listed under ul ? standard 864, 9th edition. ? listed under ul ? standard ul2572 for mass notification. ? each ini-vgc supports up to 16 asm-16 switch modules for a total of 256 switches. ? each ili-mb-e3/ili95-mb-e3 supports up to 16 asm-16 switch modules for a total of 256 switches. ? each asm-16 switch has 3 fully programmable status, indicating leds: red, yellow, and green. ? all switch functions are fully software programmable. ? slip-in label inserts allow easily modified switch designations. ordering information part number description 1100-0455 programmable addressable switch module
|
